Springwell Water Softener Maintenance: A Complete Guide

Rate this post

Limescale can be effectively combated with the use of a water softener. The best water softening systems can remove the minerals that cause hard water, leaving you with the perks of soft water on every tap. We’ve included a comprehensive springwell water softener maintenance below.

If you want your water softening system to perform at its best for as long as possible, you should follow these guidelines.

Reasons For Springwell Water Softener Maintenance

Whether you’re adding salt, tweaking the settings, or performing some other sort of springwell water softener maintenance, keep an eye out for the most typical issues that can hinder your water softener’s efficiency.

This includes:

  • Salt Bridging 
  • Resin tank maintenance
  • Mudding in salt
  • Venturi valve obstruction
  • The O-rings have worn out.
  • The motor not working and the salt running low
  • Faulty regulation valve

Poor flow rate, hard water in your faucets, and water with an unusual taste, odor, or appearance are all warning signs of these issues.

To maximize the effectiveness of your water softener, you should routinely inspect it, look for leaks, and replace any broken or damaged components.

Water softener maintenance includes making sure all the valves and lines are clear and exercising the bypass valve to ensure it is well-oiled. The brine injector valve should be cleaned at least once a year, and ideally twice a year.

Every once in a while, you might need to have your water softener serviced or repaired. It is easier to keep your water softener in good working order if you can quickly identify and fix these typical issues.

Salt Bridging 

Salt Bridge

A “bridge” can form between the water and the fresh salt in the softener brine tank if a hard crust of salt builds in the tank.

These salt barriers stop salt from entering the water system, where it could be used to create the brine that would otherwise soften hard minerals.

In the absence of this brine, the resin beads in your mineral tank will not be able to efficiently remove the hard minerals from your water.

What can I do to rectify salt bridges?

Use the handle of a broom or another implement with a comparable shape and size to break up the packed salt and eliminate the salt bridges. You may need to use some pressure; if your brine tank is constructed of plastic, take special care.

If you notice a lot of bridging, invest in a clean stick specifically for smashing salt.

Resin Tank Maintenance: springwell water softener maintenance

Resin Tank Maintenance

Some pollutants in drinking water can accumulate on the resin beads of a water softener and make it less effective. We advise applying a resin cleaner once each year to get rid of these pollutants and keep the resin clean.

If your water contains a lot of iron, volatile organic compounds, silt, or manganese, you should clean the resin more frequently because these elements are known to foul the resin.

To clean the resin tank in your water softener, do as follows:

  • Pick up a resin water softener cleanser. Rust removers and rust stain removers are both common names for resin cleansers. You need to have anything that can be used in water softeners.
  • Dilute the cleaning solution with water. The resin bed should be cleaned in the manufacturer’s guidelines. The cleanser is often diluted with water and added to the brine tank.
  • Try setting up a cycle of regeneration in your computer’s programming. Do a manual regeneration on your water softener by setting it to the appropriate setting. You can now use a clean and usable resin bed.

Keeping Softener Costs Down Can Be As Simple As Using The Appropriate Salt.

Using high-quality softener salt is the best method to prevent typical brine tanks concerns like salt mushing and salt bridging. The best salts are processed into pellets, which eliminates the possibility of them forming crusts.

You may find these three varieties of water softener salt at any local hardware store:

Crystalline Sodium Chloride

Rock salt, also known as halite, is mined from salt flats and is typically the cheapest alternative. The reason is: it’s not very pure and has a lot of nasties mixed in.

These contaminants increase the likelihood of crystallization and can contaminate the brine tank, both of which have negative effects on the efficiency of the system.

The Solar Salt

Large water pools are used for solar salt farming. Therefore, it is better suited for use in brine tanks because it is purer and more soluble than rock salt. Most commonly, pellets are the form in which solar salt is sold.

The Solar Salt

Soda-free salt

When compared to rock salt or solar salt, evaporated salt is purer and more expensive because of the additional processing involved in its production.

Evaporated salt, which has a purity level of 99.9%, is the best salt for use in softener systems, as it can assist in reducing the need for brine tank maintenance and the likelihood of clogging.

Using high-quality salt can extend the duration between salt refills, which is especially helpful for those who have really hard water, like that from a well.

FAQs: springwell water softener maintenance 

What is the expected cost of Springwell water softener maintenance?

Costs for annual maintenance of a water softener range from zero to seventy-five dollars, depending on the nature of the service.

When should you perform maintenance on your water softener?

To guarantee their products are still functioning well, most water softener manufacturers advise annual inspections or professional maintenance. Kinetico water softeners are the most dependable on the market, so we highly suggest them.

Final Words: springwell water softener maintenance

In most cases, it’s best to let a professional handle any water softener repairs you need. You may clean out your softener tank yourself, or you can hire a professional plumber or handyman.

Services to maintain water softeners are provided by several plumbers. This process involves checking the system and flushing out the resin beads.

Most people should be able to handle routine maintenance on their own, but if you’d rather not, you may always pay someone else to do it.

Sharing Is Caring:

Leave a Comment