How to reset samsung water filter? If you’re like me, you’ve probably been using the same water filter in your refrigerator for years. It works great, and it’s always been reliable. So when it suddenly stops working, it can be a huge shock! That’s why we want to help you reset Samsung water filters and get back to enjoying your ice and chilled beverages as quickly as possible.
How to Reset Samsung Water Filter
Turn off your refrigerator
The first step is to unplug your refrigerator. If you have a power outage, wait until the electricity comes back on before moving on to the next steps.
Don’t turn off the power at either:
- The breaker box (or circuit breaker)
- The outlet plate
Locate the water filter cover on the refrigerator
You will find the water filter cover on the refrigerator. It is located at the top-rear of the appliance, behind and to the left of the ice maker. The filter housing is a gray plastic compartment with an opening in front and a screw-on cap on top.
To locate your water filter:
Open your refrigerator door and look for an oval-shaped plastic housing labelled “Water Filter” or “Water Filter.” If you can’t find it, check under where your ice cubes come out of your dispenser (sometimes called an icemaker). This is generally where all filters are located.
Turn the filter counterclockwise
- Turn the filter counterclockwise to remove it from the refrigerator holder.
- Remove all water from the filter, including any remaining ice cubes or melted ice in the basket at the bottom of your refrigerator, before setting your new filter into place in its holder and replacing its cover.
Get a bucket
- Step 1: Find the O-ring on your old filter. If you can’t find it, then replace it with a new one and don’t worry about resetting it.
- Step 2: Remove any screws holding the bottom part of your filter together (don’t bother taking off any other parts).
- Step 3: Slide off the bottom piece and disconnect everything inside as needed to get access to the reset button. This button is usually in an indentation tucked away somewhere near where all of the water comes out when you turn it on, but if not, look for little plastic bumps or protrusions from which wires may be coming out—they should be pretty easy to spot once you know what you’re looking for!
Remove any residue
The first step to resetting your Samsung Water Filter is removing any residue that may be left inside of the housing. If it’s particularly tough, you can use a damp cloth or a toothbrush to remove the build-up. Don’t use harsh chemicals or scraping tools like knives or razor blades to clean out your filter as this could damage it permanently.
Place the O-ring from the old filter
- Remove the O-ring from your old filter.
- Place the new O-ring on your new filter, making sure it’s not damaged or out of position (see above for reference).
- Tighten the nut as much as possible with a wrench or pliers. You don’t have to worry about stripping any part of the filter; we’ll be taking care of that later!
Push your new filter into the housing
Once you’ve made up your mind about whether to switch to a new filter, it’s time to actually install it. Follow these steps:
- Place your old filter in the disposal bin and put on gloves before handling the new one. If you’re not sure where this is located, check out our information on filters for tips on where yours might be hiding.
- Turn off the water supply before disconnecting the old filter from its housing unit and removing any remaining water in its tubing system by hand (we recommend using a funnel).
- Push your new filter into the housing, and turn it clockwise to lock it in place — but don’t twist too hard! You should hear an audible click when you’ve succeeded at locking things down tight enough that they won’t loosen up again all by themselves anytime soon (which is good news when we consider what happens if something goes wrong with our plumbing systems).
- Make sure everything looks good before proceeding further: no cracks or leaks anywhere should be visible around seams where two components come together; nothing should feel loose or shaky while being held tightly in place; there shouldn’t be any funny smells coming out of either end of either component/connection point; etcetera ad nauseam.
Run about two gallons of water through your new filter for 10 seconds before using your ice or water dispenser again. This will flush out any old water from the filter and ensure that all of the contaminants are removed from it.
Open your fridge and plug it back in or turn it back on if you unplugged it to replace your water filter. When you’re finished with replacing your water filter, it’s time to reset the Samsung filtration system.
Unplug your fridge or turn off the power supply. If you had to do this earlier because of a power outage, now is the time to plug it back in or turn it on again.
Reset Your Filter
Now that you have a new filter, you need to know how to reset Samsung water filter so you can start using it again!
To reset your Samsung water filter, you will need to:
- Wash the filter
- Install the new filter and make sure it’s turned on
- Test the water coming out of your new filter by using a test kit. If there are any contaminants in your water, you’ll be able to see them on the paper strip.
Conclusion
Samsung has been a reliable brand when it comes to all things appliances. Their water filter system is no exception. The Samsung water filter is a small but powerful unit that works harder than the big ones at large costs. It is built to fit right into your kitchen sink.
We hope this article has been helpful for you to reset Samsung water filter. If you have any questions or concerns, please let us know in the comments below!