How to replace water filter in samsung fridge? The water filter in your Samsung refrigerator is a helpful tool for ensuring the quality of the water you drink and cook with. The filter helps remove certain contaminants from your water, such as chlorine, lead, mercury and more.
It’s important to change your filter regularly so that these contaminants don’t become an issue for you or your family. If you are replacing a water filter in your Samsung refrigerator, it is simple to do. Just follow these easy steps and replace the water filter.
What Is Samsung Fridge Filter?
Samsung Fridge filter is an air filter for refrigerators manufactured by Samsung. It is designed to keep the food in your refrigerator fresh and free from odors. The filter is located at the back of the refrigerator and has to be replaced every six months or so depending on how often you open your fridge door.
The purpose of this filter is to remove dust, pollen and other particles in the air that can damage your food. This filter also helps eliminate smells caused by bacteria and mold growth in your fridge, which can affect your health and spoil the taste of your food.
How often should I replace my Samsung Fridge Filter?
The lifespan of a Samsung Fridge Filter depends on how often you open your fridge door, whether you live in a dusty area or not, etc. The more frequently you open your fridge door, the sooner you will have to replace it.
You don’t need to replace it immediately when it becomes dirty; however, if you notice any change in smell coming from inside or outside of your fridge then it’s time to replace it immediately as this could be a sign that there are unwanted bacteria growing inside.
How to Replace Water Filter in Samsung Fridge – A Step By Step Guide
Here’s how to replace the water filter in a Samsung fridge:
Step 1: Locate the Filter
There are a few different sizes of Samsung refrigerators, so you’ll want to find out which model yours is. The water filter is located on the back of your refrigerator, near the top and behind the water dispenser. It’s inside a circular door that you can open with two screws. Once it’s open, carefully pull out the old filter and discard it in a plastic bag or other container.
Step 2: Remove the old filter
To replace the filter, follow these steps:
- Turn off and unplug your fridge before removing the old water filter.
- Remove the bottom drawer from your fridge by pulling it out slightly and then lifting up on its handle to remove it completely from its housing (if applicable).
- Use a Philips head screwdriver to loosen the screws that hold in place each end of your water filter bracket inside this compartment (if applicable). Do not attempt to remove these with pliers or any other tool besides what we’ve mentioned here; if you do so without loosening them first, they may break off inside your refrigerator and make future access impossible!
Step 3: Remove the cap
- Remove the cap from your filter assembly.
- Make sure that you don’t lose it, as it’s a part of the filter assembly.
Step 4: Remove the lid from your water tank.
There is usually a small locking mechanism on the lid that you can release by pushing the button on top of it. The lid should then lift off easily. 3. Remove the filter from its housing and replace it with a new filter.
Step 5: Install the new filter
Once you have removed the old filter, it’s time to install the new one. Make sure that you are installing your new filter in the correct orientation:
- The arrow on top of the white plastic ring should point towards you (the side with two small lines).
- The arrow on either side of the blue sealing ring should be pointing towards each other (and away from you).
- You must not use any tools when installing your new water filter; instead, make sure that it is pushed into place securely by hand. If there is any damage to this part of your machine, chances are good that water will leak out around it as soon as you turn back on power!
Step 6: Put cap back on
You should now have a new filter in your fridge and a new cap on top of it. Make sure the filter is tight and you hear a click when you put the cap back on, otherwise it won’t be as effective.
Step 7: Flush water filter and reset indicator
You may have to flush the water filter once a year, especially if you live in a hard water area. To do this, run clean tap water through it for five minutes and then turn off your Samsung refrigerator. Wait three minutes before turning it back on. This should reset the indicator light to green so that you know everything is working properly again!
How to flush a Samsung water filter:
There are two ways to flush out your Samsung fridge’s internal filters – either by just running some tap water through them or by using an actual cleaning solution such as vinegar (to ensure they’re squeaky clean).
When replacing the water filter in your Samsung refrigerator, you will need the following materials and tools:
- Water filter replacement kit
- Replacement water filter cartridge for your fridge (either carbon block or sedimentary type depending on your refrigerator model)
Most fridge filters are easy to replace. The replacement process should take about 15 minutes from start to finish, but you can do it in less time if you have some prior experience with plumbing. The steps below will walk you through what is required.
Conclusion
This is a simple process to replace the water filter in your Samsung refrigerator. Samsung filters are very easy to replace and the cost of doing so versus buying a new one is well worth it. You can find replacement filter kits on Amazon, eBay, or at major big-box stores.
While fridge filters have trouble adsorbing certain contaminants found in city water, you can prevent mineral buildup by cleaning your fridge coils every month to ensure it’s running at full capacity. Alternatively, if you live in an area with very hard water, consider using bottled water and not the tap.