How to Remove Water Filter From Whirlpool Refrigerator?

Rate this post

How to Remove Water Filter from Whirlpool Refrigerator? Replacing the water filter on your refrigerator is easy. All you need to do is unplug your refrigerator, remove the filter cover, turn the old filter a quarter turn counterclockwise, and replace it with a new one. 

You should replace your refrigerator’s water filters every 6 months, so keep this tip in mind if you’re looking to save money on your next shopping trip.

How to Replace the Water Filter in a Whirlpool Refrigerator

It’s a good idea to replace the water filter every 6 months. To determine when your filter needs to be replaced, look at the calendar and count forward six months from the current date. If it’s December 1st, for example, that means your filter should be replaced by June 30th (6 months past January 31st).

You may notice that your refrigerator is not cooling or freezing as well as it used to. This is because refrigerators use energy-efficient technology that requires clean water to operate properly; dirty or clogged filters can affect the performance and efficiency of the unit over time.

If you don’t replace your refrigerator’s water filter on time, you could end up spending more money than necessary on electricity bills because having an inefficient refrigerator will result in higher usage than normal. 

It is during periods when food needs to be cooled down quickly before spoiling due either directly or indirectly through cooking processes such as boiling pasta which requires hot water that must pass through a cold source first so make sure everything works properly before making any expensive purchases!

How to Remove Water Filter from Whirlpool Refrigerator

Step 1 – Unplug the refrigerator

Before you start, unplug the refrigerator. If it’s plugged in and you remove the filter, there’s a chance that you could shock yourself or damage the refrigerator by touching parts which still have electricity running to them. Unplugging it first is always a good idea!

See also  When to Replace Zero Water Filter?

Step 2 – Remove the filter cover

To remove the filter cover, you will need to flip the refrigerator on its side. This may sound a bit scary, but it’s actually quite easy and your Whirlpool refrigerator will be perfectly fine after doing this.

You’ll notice that there are two screws holding down the filter cover to the door of your Whirlpool refrigerator and that they’re hidden under little plastic covers. These plastic covers just snap out by pressing them with your fingernail or pen cap for about 10 seconds or so.

The first one is closest to you when standing at eye level with your refrigerator (to get there, just climb onto top of counter). To remove this one:

  • Press down gently into black rubber gasket until it pops out
  • Remove screw from inside hole using Phillips head screwdriver

Step 3 – Turn the filter a quarter

  • There are two ways to remove your water filter from your Whirlpool refrigerator: by turning it a quarter turn counterclockwise or by removing it completely from the bracket and pulling it down.
  • To do this, you’ll need to turn the filter a quarter turn counterclockwise at each end of its base, using your hands or pliers if necessary; once both ends have been loosened, you should be able to pull them off with minimal effort. If you can’t manage this step alone, ask someone else for help—you may need an extra pair of hands!
  • If you’re still having trouble removing your water filter after following these steps (or if there is no way that I know of), try contacting Whirlpool customer service at 800-253-1301 so they can walk through some other options with you over the phone or via email/chat.
  • You may also want check out their website as well!
See also  Where is The Keurig 2.0 Water Filter Located?

Step 4 – Pull out the water filter


To remove the water filter, you’ll need to turn it a quarter turn counterclockwise. Then, pull out the old filter and replace it with a new one. Twist your replacement filter clockwise until you can’t turn it anymore. This will ensure that you’ve tightened the new filter securely in place so that it won’t leak or slide out of its housing during operation.

Finally, snap the lid back on to finish reassembly!

Step 5 – Twist your replacement filter

  • Twist your replacement filter clockwise until you can’t turn it anymore. Don’t over tighten the filter, because this can cause leaks in the door seal and damage to your refrigerator’s coils.
  • Do not use a filter wrench or other tool to remove or install the water filter—you could damage it!

Step 6 – Reinsert the filter

Reinsert the filter by turning it a quarter turn clockwise. Once it is fully inserted, make sure that you do not force the filter when turning it as this could break your filter. 

If you have trouble inserting or removing the water filter, check to see if there is debris blocking its path. If so, use a small brush or cloth to clean out any debris preventing the filter from being turned and then try again.

To replace the water filter, you’ll need to follow these simple steps:

  • Turn off your refrigerator and unplug it.
  • Remove the filter cover from its compartment on the rear wall of the refrigerator (it’s easiest to remove this first, as it’s slightly larger and may get in your way).
  • Turn the water filter a quarter turn counterclockwise (to loosen) and pull out of its compartment. You should also note that removing this part will leave behind some sediment in your system—so if at all possible, try not to do this when there is any standing water in your refrigerator! 
  • If you want to be extra careful while handling this part, consider using rubber gloves on both hands during removal.
See also  How to Install a Whole-House Water Filter on a Well?



To remove the water filter from your Whirlpool refrigerator, unplug the refrigerator, and disconnect the water line that is attached to the refrigerator’s side. Next, pull down on the filter cup to remove it, and then empty its contents into a bucket or sink. 

Finally, clean the filter housing of any debris left by the old filter, install a new filter cup if necessary, and reattach the water line.

It’s easy to do this yourself. Just remember to unplug the refrigerator before you start and make sure your replacement filter is ready to go.

We hope that this article on how to remove water filter from Whirlpool refrigerator has proved to be helpful. Should you need any further assistance, please do not hesitate to leave a comment below and we will be more than happy to assist you in whichever manner of need you might have.

Sharing Is Caring:

Leave a Comment