How to change brita water filter? First, you need to know what kind of water filter you have. Brita makes several types of filters. Each filter has a different cartridge. Some are made for pitchers and some are made to attach directly to your faucet.
All cartridges have a fill line and an arrow that shows which direction the water should flow, whether it is turned off or on. If you’re replacing your current filter with a Brita, check the arrow first.
Here’s how to change your water filter: Simply twist off your old filter (you’ll know you’re doing it right if there’s a popping sound), rinse it in warm running water, and then pop on the new one. It takes just seconds!
What is Brita’s water filter?
The Brita water filter is a pitcher filter. It’s also sometimes referred to as a water filtration system and a water purifier. This means that you can use it to filter the tap water in your home, which will remove chlorine and other impurities from the tap and turn it into clean, healthy drinking water. The Brita brand is really popular because of its low cost, but there are plenty of other brands out there if you’re looking for something different.
Some people also use their filters for more than just drinking—they use them for things like cooking or cleaning as well!
How does it work?
The Brita filter is made up of tiny pores that can trap contaminants. When water flows through the filter, it comes into contact with this resin and then passes through it. When the water hits one side of a pore, for example, it moves through it in one direction but cannot pass back through because only one side has tiny holes in it.
How does a Brita work? The effectiveness of any filter depends on how well its pores are designed to do their job—that is, how easy they allow water molecules to pass while stopping harmful substances like chlorine and copper. In an ideal world every contaminant would be removed at once; unfortunately that’s not always possible due to limitations such as cost or power requirements (for example).
What are the benefits of the Brita water filter?
- Brita filters are inexpensive.
- They remove chlorine, which is the main ingredient in tap water that can cause you to feel sick when you drink it.
- They also remove copper, mercury, cadmium and zinc from your water. These metals can cause health problems if consumed over time.
- The filters improve the taste of water by removing these chemicals and metals from your drinking water supply.
- The filters reduce the amount of plastic waste in our environment by making it unnecessary for people to throw away bottles after each use.
How to Change Brita Water Filter?
- Locate the filter indicator
To reset the filter indicator light, locate the filter indicator light on the front of your pitcher. If the green light is on, press it once to reset it.
- Open the lid and remove the old filter
To open the lid, grab it with both hands and pull. If you’re having trouble, try jiggling it a bit; you may need to give it a bit more force than usual.
Once you’ve got it open, remove your old filter by pulling on it gently (it should come out easily). Take care not to touch any part of your filter that might have been contaminated by water or other substances as this could cause bacteria growth and make you sick if ingested later on. Never reuse an old filter! Drop in a new one — you won’t need to rinse it first.
- Replace the lid and fill up your Brita with water.
Fill up the pitcher with water.
Leave the lid open so that water can flow through the filter and into your Brita pitcher. You might want to set it on a countertop or other sturdy surface so you don’t have to move it around as you pour in water from a faucet, or from another container (like a glass).
Pour some of your clean drinking water into a glass and enjoy! If there’s more than what you need, keep pouring until all of it has gone through your new filter; then put some back into the Brita bottle if possible (otherwise just dump what’s left in the sink).
- You’re all set!
You’re all set! The light will turn green again to let you know your filter is ready to go. It’s important to change your filter regularly, as the Brita pitcher and faucet mount filters should be replaced every 40 gallons, or about every two months—depending on how much water you drink.
If you have an under-the-sink model, it should be changed every 100 gallons or four months (and can also be purchased in packs of two). Your filtered water pitcher’s lifespan may vary depending on how often it’s used and how much sediment gets into the bottom of the container over time; we recommend replacing it every two years if possible.
The main guy at Brita says they’ve seen some pretty nasty stuff come out of their old filters over the years: rusty nails, coins and even a toy soldier! But don’t worry too much about these things happening with yours because most models come with flow restrictors installed so nothing larger than 0.5 microns can get through. If any impurities do make it past these screens however then don’t worry—your first line defense against them will always be your healthy immune system 😉
Changing your Brita water filter is super easy!
Sure, it’s pretty easy to change a Brita filter—but if you’re still unsure, we’ve got a step-by-step guide for you.
Fill your sink with 2 inches of water and drop in both pieces of the filter.
Press down on the top piece until it clicks into place. Then press down on the bottom piece until it clicks into place as well (this part can take some force).
Now just wait for about 15 seconds, and voila! Your filter is all set up and ready to go!
Conclusion: How to change brita water filter
So we hope we have answered your question of how often should you change the filters. The answer is quite simple, just remember to change them every 4 months and it will work perfectly.